Dcubed's Shape-Memory Actuators Have Locked More Than 500 Products Into Orbit

The Munich-based company's flight-ready mechanisms and deployable structures are on a path to build solar arrays directly in orbit.

About Dcubed

Published

A satellite's most critical moment happens in the first few minutes after it reaches orbit. That is when its solar arrays must unfold, its antennas must deploy, and its booms must extend, all while surviving the violent transition from launch vibration to the vacuum of space. For a growing number of satellite builders, the components enabling that transformation are coming from a catalog. Dcubed, a Munich-based space hardware startup, sells standardized release actuators and deployable structures designed to be bolted on and forgotten until they are needed [PERPLEXITY SONAR PRO BRIEF, retrieved 2024]. The company reports more than 500 of its products are now in space, serving over 170 customers worldwide [Dcubed, November 2026]. Its latest €27.2 million Series A+ round, led by Warsaw Equity Group, is funding an even more ambitious bet: manufacturing large solar-array support structures directly in orbit [Tech.eu, November 2026].

The catalog wedge for satellite skeletons

Dcubed's initial wedge is pragmatic. Satellite manufacturers, from university CubeSat teams to commercial constellation operators, need reliable mechanisms to hold components secure during launch and release them on command in space. The traditional approach often involved custom, one-off designs or pyrotechnic devices that cannot be tested or reset after assembly. Dcubed's core products are shape-memory alloy release actuators, like its Nano and Micro Pin Pullers, which the company says can be actuated and reset hundreds of times on the ground in seconds [Dcubed, retrieved 2024]. This allows for extensive pre-flight testing. The hardware is sold as commercial off-the-shelf (COTS) or lightly customized components, with claimed lead times as short as six to eight weeks [SatCatalog, retrieved 2026]. For a market moving toward faster, more standardized satellite production, this catalog model addresses a persistent bottleneck in assembly and integration.

Scaling from mechanisms to megawatts

The company's trajectory follows a clear technical stack, moving from discrete mechanisms to integrated power systems.

  • Foundation: Release Actuators. Products like the nD3PP and uD3PP pin pullers provide the basic 'latch' function, securing solar panels, antennas, and instrument booms during launch. Their field-resettable, low-shock design is a direct response to the industry's need for testable, non-pyrotechnic solutions [Dcubed, retrieved 2024].
  • Expansion: Deployable Structures. Building on its actuator technology, Dcubed designs and supplies the folded structures themselves. These include rigid and deployable solar arrays for small satellites, like the 100-watt PowerCube stowed in a 1U form factor [satsearch blog, April 2020].
  • Ambition: In-Space Manufacturing (ISM). The next layer is ARAQYS, a family of systems intended to manufacture large solar-array support structures in orbit. The goal is to bypass the volume constraints of a launch fairing entirely. The first demonstration, HALO, is a 2-kilowatt radial solar array scheduled for a 2027 launch on a SpaceX rideshare mission [PERPLEXITY SONAR PRO BRIEF, retrieved 2024].

This stack progression is capital intensive, which the recent funding is meant to address. The €27.2 million Series A+ round follows a €4.4 million Series A in August 2024 [SpaceNews, August 2024]. The capital is earmarked for scaling the deployment systems business and advancing the in-space manufacturing roadmap [Tech.eu, November 2026].

Traction and a transatlantic footprint

Customer adoption has been geographically broad. In 2024, U.S. customers accounted for more than half of Dcubed's client base, prompting the company to establish a Colorado office led by managing director Andria Fortier [SpaceNews, August 2024]. The company's public partner and customer list includes names like NASA, HawkEye 360, Astroscale, and Atomos Space [PERPLEXITY SONAR PRO BRIEF, retrieved 2024]. A key technical partnership with Exotrail involves an in-space manufacturing demonstration that launched on a SpaceX rideshare; the mission plan involved unfurling a thin solar blanket from Solestial and manufacturing its support structures in orbit for a 100-watt array [SpaceNews, August 2024].

Funding Round Date Amount Lead Investor(s)
Series A August 2024 €4.4 million Expansion Aerospace Ventures, BayBG Venture Capital [SpaceNews, August 2024]
Series A+ November 2026 €27.2 million Warsaw Equity Group (WEG) [Tech.eu, November 2026]

The team is led by co-founder and CEO Dr. Thomas Sinn, who founded the company after encountering a lack of suitable release hardware for a space experiment [PERPLEXITY SONAR PRO BRIEF, retrieved 2024]. He is joined by co-founders Alexander Titz, managing director of operations, and Joram Gruber, principal engineer for mechanisms [LinkedIn, retrieved 2026].

The in-orbit manufacturing gambit

The technical ambition of in-space manufacturing is where Dcubed's bet gets its highest risk and potential reward. The ARAQYS-D3 mission, scheduled for 2027, is not just about deploying a solar array. It is intended to demonstrate the in-orbit fabrication of a 10-meter boom to support that array [PERPLEXITY SONAR PRO BRIEF, retrieved 2024]. The value proposition is straightforward: structures manufactured in space are not limited by the diameter of a rocket fairing. This could enable solar arrays an order of magnitude larger than what can be launched pre-assembled, a critical capability for high-power missions like space tugs, lunar bases, or large commercial platforms.

The company has already taken steps toward this goal. In late 2024, materials for an in-space manufacturing experiment were launched to the International Space Station aboard a SpaceX Commercial Resupply mission [Factories in Space, retrieved 2026]. The European Space Agency is also backing a related mission to create a solar array capable of generating over 100 watts [3DPrint.com, retrieved 2026].

Technical breakdown and scale risks

From an engineering perspective, Dcubed's approach is a study in incrementally raising the technology readiness level (TRL). Its pin pullers claim TRL 9, meaning they are flight-proven with established heritage [SatCatalog, retrieved 2026]. The deployable solar arrays build on that base. The in-space manufacturing systems, however, represent a significant leap in complexity. They must autonomously handle material feedstock, precision fabrication in microgravity, and final structural integration, all while surviving the radiation and thermal cycles of orbit. The 2027 demonstration will be the first full-system test of this capability.

The sober assessment lies in the transition from a component supplier to a systems integrator for mission-critical power. A failed pin puller might doom a single satellite. A flaw in an in-orbit manufactured megawatt-scale solar array could scuttle a billion-dollar platform. Scaling the manufacturing process itself presents another challenge. The economics of in-space fabrication must eventually beat the cost of launching increasingly cleverly folded, but terrestrially built, structures. For now, Dcubed's catalog business provides the revenue and flight heritage to fund the gamble. The next twelve months will be about executing on the ground-based development for the 2027 demonstration and converting its growing customer list into deeper design wins for its next-generation power systems.

Sources

  1. [Dcubed, November 2026] Company claims on customers and products in space | https://dcubed.space/
  2. [Tech.eu, November 2026] Dcubed raises €27.2M Series A+ to scale space deployment and power systems | https://tech.eu/2026/11/18/dcubed-raises-eur272m-series-a-to-scale-space-deployment-and-power-systems//
  3. [PERPLEXITY SONAR PRO BRIEF, retrieved 2024] Company and product overview | https://dcubed.space/
  4. [SpaceNews, August 2024] Dcubed raises 4.4 million euros for in-space manufacturing | https://spacenews.com/dcubed-raises-4-4-million-euros-for-in-space-manufacturing/
  5. [SatCatalog, retrieved 2026] Product specifications for Nano and Micro Pin Pullers | https://satcatalog.com/
  6. [satsearch blog, April 2020] PowerCube deployable solar array | https://blog.satsearch.co/
  7. [Factories in Space, retrieved 2026] In-space manufacturing materials launch to ISS | https://factoriesinspace.com/
  8. [3DPrint.com, retrieved 2026] ESA backing for solar array mission | https://3dprint.com/
  9. [LinkedIn, retrieved 2026] Co-founder profiles | https://www.linkedin.com/company/dcubedspace

Read on Startuply.vc